We’re moving office! From 22 July, our address will be Level 22, 2 Southbank Boulevard, Southbank.
Find out more

Arc flash hazard management

Owner/operators of electrical installations that are complex, high voltage or low voltage and high current should manage arc flash hazards.

Overview

An arc flash is a serious hazard that has the potential to cause death, serious injury, damage to equipment and loss of electrical supply. An arc flash could be considered as an unexpected and violent, electrical short circuit in the air that produces an arc and associated explosions of gases and molten metal.

High voltage (HV), low voltage (LV) high current and complex electrical installation owners and operators need to take particular account of and manage their arc flash/fault hazards.

This does not mean owners and operators of other installations do not also need to manage these risks.

This guidance has been developed to provide information about the overall need to understand and manage arc flash hazards and the risk factors that need to be considered.

Guideline_ArcFlashHazardManagement_July2022
PDF 774.84 KB
Updated 15 Dec 2022
(opens in a new window)
Guideline - Arc Flash Hazard Management
ArcFlash_SelfAuditTool_July2022_EditableForm
PDF 298.84 KB
Updated 15 Dec 2022
(opens in a new window)
Arc Flash Self-Audit Tool (editable)

Date: 20/07/2024 10:07

The currency and accuracy of this information cannot be guaranteed once printed or saved to a storage device. If in doubt, please check the Energy Safe Victoria website for the current version.

Reviewed